Epoxy Resins
| Product | Viscosity (cps@25°C) | Density (g/mL@20°C) | Equivalent epoxy weight (g/eq) | Reticulable substance (%) | Labelling | Technical data sheet | Safety data sheet |
|---|---|---|---|---|---|---|---|
| ITAPOX 131A | 400 - 700 | 1.14 | 190 | 100 |
|
|
|
| ITAPOX 180 | 1200 - 1800 | 1.17 | 190 | 100 |
|
|
|
| ITAPOX 451 | 250 - 550 | 1.14 | 190 | 100 |
|
|
|
| ITAPOX 170A PLUS | 850 - 1050 | 1.12 | 190 | 100 |
| ||
| ITAPOX 440A | 300 - 700 | 1.14 | 190 | 100 |
|
|
|
| ITAPOX 215A | 4000 - 5500 | 1.19 | 190 | 100 |
|
|
|
| ITAPOX 139 | 350 - 550 | 1.17 | 190 | 100 |
|
|
|
|
ITAPOX 910 DYAMOND system, part A. Allows to treat white and precious materials without the slightest yellowing. Does not create the typical dark/wet effect on slab defects. |
300 - 900 | 1.10 | 185 - 195 | 100 |
|
|
|
|
ITAPOX 108W Modified version of ITAPOX 108 with enhanced resistance against low temperatures (non crystallising). |
400 - 700 | 1.11 | 200 - 210 | 100 |
|
|
|
|
ITAPOX 106 Low viscosity resin; high transparency and gloss, high crystallisation resistance at low temperatures. Extreme adhesion and yellowing resistance. |
450 - 650 | 1.13 | 195 - 205 | 100 |
|
|
|
|
ITAPOX 106HV High viscosity version of ITAPOX 106, suitable for light coloured materials that should maintain their natural tone |
700 - 1000 | 1.14 | 195 - 205 | 100 |
|
|
|
| ITAPOX 134 | 10 - 100 | 1.06 | 200 - 220 | 100 |
|
|
|
|
ITAPOX 140 Extra low viscosity version of ITAPOX 106, suitable for impregnation of granites or high penetration of slabs with fine cracks |
250 - 450 | 1.11 | 190 - 200 | 100 |
|
|
|
| ITAPOX 121 | 800 - 1100 | 1.17 | 200 - 210 | 100 |
|
|
|
| ITAPOX 170A | 850 - 1050 | 1.12 | 190 - 200 | 100 |
|
|
|
| ITAPOX 208W | 400 - 700 | 1.11 | 190 - 205 | 100 |
|
|
|
|
ITAPOX 108 Low viscosity Bisphenol-A liquid epoxy resin modified with glycidyl ether of C12-C14 aliphatic alcohol |
400 - 700 | 1.10 | 195 - 205 | 100 |
|
|
|
|
ITAPOX 123 Bisphenol A/F liquid epoxy resin modified with glycidyl ether of aliphatic alcohol C12-C14 reactive diluent |
800 - 1100 | 1.15 | 190 - 200 | 100 |
|
|
|
|
ITAPOX 124 Biasphenol-A liquid epoxy resin, modified with 1,6-hexanediol diglycidylether. Better mechanical, chemical properties and faster curing compared to resins diluted with monofunctional reactive diluents |
900 - 1200 | 1.15 | 175 - 185 | 100 |
|
|
|
|
ITAPOX 127 A/F liquid epoxy resin modified with glycidylether of C12-C14 aliphatic alcohol. Faster curing and better crystallisation resistance compared to similar A/F formulations |
900 - 1300 | 1.13 | 185 - 195 | 100 |
|
|
|
|
ITAPOX 128 A/F liquid epoxy resin; modified with glycidylether of aliphatic alcohols C12-C14 |
800 - 1200 | 1.15 | 190 - 210 | 100 |
|
|
|
| ITAPOX 970 | 1800 - 2500 | 1.09 | 100 |
|
|
|
| Product | Viscosity (cps@25°C) | Density (g/mL@20°C) | Equivalent epoxy weight (g/eq) | Reticulable substance (%) | Labelling | Technical data sheet | Safety data sheet |
|---|---|---|---|---|---|---|---|
|
ITAPOX 50 Pure bisphenol-A liquid epoxy resin (product obtained by the reaction between bisphenol-A and epichlorohydrine) |
11000 - 14000 | 1.17 | 182 - 190 | 100 |
|
|
|
|
ITAPOX 50/50 Medium viscosity liquid epoxy resin made by bisphenol A resin (product obtained by the reaction between bisphenol A and epichlorohydrine) and bisphenol F resin (product obtained by the reaction between bisphenol F and epichlorohydrine) |
4500 - 6500 | 1.18 | 170 - 180 | 100 |
|
|
|
|
ITAPOX 70/30 Medium viscosity liquid epoxy resin made by bisphenol A resin (product obtained by the reaction between bisphenol A and epichlorohydrine) and bisphenol F resin (product obtained by the reaction between bisphenol F and epichlorohydrine) |
5000 - 7000 | 1.17 | 175 - 190 | 100 |
|
|
|
| Product | Viscosity (cps@25°C) | Density (g/mL@20°C) | Equivalent epoxy weight (g/eq) | Reticulable substance (%) | Labelling | Technical data sheet | Safety data sheet |
|---|---|---|---|---|---|---|---|
|
ITAPOX 75X Bisphenol A solid epoxy resin (product obtained by the reaction between bisphenol A and epichloridrine) in Xylene solution. The equivalent epoxy weight is expressed for the solid resin only |
6500 - 12000 | 1.11 | 450 - 500 | 75 |
|
|
|
Waterborne Epoxy Resins
| Product | EEW | Viscosity (cps@25°C) | Density (g/mL@20°C) | Solids content (%) | Labelling | Technical data sheet | Safety data sheet |
|---|---|---|---|---|---|---|---|
| ITAPOX WATER 110 | 1000 | 300 - 2600 | 1.05 | 52 |
|
|
|
| ITAPOX WATER 120 | 1050 | 1000 - 7000 | 1.08 | 53 |
|
|
| Product | EEW | Viscosity (cps@25°C) | Density (g/mL@20°C) | Solids content (%) | Labelling | Technical data sheet | Safety data sheet |
|---|---|---|---|---|---|---|---|
| ITAPOX WATER 201 | 328 | 400 - 5000 | 1.10 | 60 |
|
|
|
Mannich Bases
| Product | Viscosity (cps@25°C) | Gardner colour | PHR (mixing ratio) | Pot-life 150g@20°C (min) | Labelling | Technical data sheet | Safety data sheet |
|---|---|---|---|---|---|---|---|
| ITAMINE CA80 | 20 - 60 | 6 | 50 | 20 - 25 |
|
|
|
|
ITAMINE CA81 Solvent free epoxy coatings, epoxy mortars, usable by flow or injection, also with high loaded compounds, primer for industrial flooring. High adhesion properies in non trated surfaces. Good chemical and mechanical resistance |
140 - 200 | 6 | 50 | 20 - 30 |
|
|
|
|
ITAMINE FL43 Epoxy mortars, concrete reparation, adhesives, pouring, paints, flooring primers. Good reactivity at low temperatures and good chemical resistances |
100 - 400 | 8 | 50 | 40 - 50 |
|
|
|
|
ITAMINE FL43/S Epoxy mortars, concrete reparation, adhesives, pouring, flooring primers. Slow curing, low mixing ratio and higher chemical resistance version of FL43 |
100 - 400 | 8 | 35 | 55 - 65 |
|
|
|
|
ITAMINE MB400P Epoxy mortars, adhesives, plasters. Excellent in wetting conditions and/or cold tempertaures (wet concrete). Excellent mechanical properties. Polyeric version of Itamine MB400 |
300 - 500 | 3 | 40 | 15 - 20 |
|
|
|
|
ITAMINE MB400P/FF Epoxy mortars, adhesives, plasters. Excellent in wetting conditions and/or cold tempertaures (wet concrete). Excellent mechanical properties. Phenol free version of Itamine MB400/P |
200 - 500 | 5 | 40 | 20 - 30 |
|
|
|
| ITAMINE MB401P/FF | 300 - 600 | 5 | 40 | 10 - 25 |
|
|
|
|
ITAMINE MB410P Mortar, adhesives. Excellent in wetting conditions and/or cold temperatures. Excellent chemical and mechanical properties |
50 - 200 | 7 | 50 | 20 - 30 |
|
|
|
|
ITAMINE MB430P Epoxy mortars, adhesives, plasters. Excellent in wetting conditions and/or cold tempertaures (wet concrete).Phenol free version of Itamine MB400/P, with beautiful optimized surface |
300 - 700 | 6 | 40 | 15 - 25 |
|
|
|
| ITAMINE MB460P | 2000 - 4000 | 6 | 50 | 10 - 20 |
|
|
|
| ITAMINE MB483P | 20 - 100 | 3 | 50 | 30 - 60 |
|
|
|
| ITAMINE MB484P | 20 - 100 | 3 | 50 | 30 - 60 |
|
|
|
|
ITAMINE MB501 Winter grade primers for concrete or metal, concrete reparation, epoxy mortars and general coatings with excellent reactivity even at near zero °C and damp or wet substrates. |
100 - 400 | 5 | 50 | 20 - 25 |
|
|
|
Waterborne Curing Agents
| Product | Viscosity (cps@25°C) | Amine value (mgKOH/g) | AHEW (g/eq) | Gardner colour | PHR (mixing ratio) | Pot-life 150g@20°C (min) | Labelling | Technical data sheet | Safety data sheet |
|---|---|---|---|---|---|---|---|---|---|
| ITAMINE WATER 1419 | 10500 - 18500 | 160 - 180 | 214 | 0.7 | 113 | 45 - 65 |
|
|
|
| ITAMINE WATER 2157 | 8500 - 15000 | 170 - 220 | 225 | 3.8 | 118 | 115 - 180 |
|
|
|
| Product | Viscosity (cps@25°C) | Amine value (mgKOH/g) | AHEW (g/eq) | Gardner colour | PHR (mixing ratio) | Labelling | Technical data sheet | Safety data sheet |
|---|---|---|---|---|---|---|---|---|
| ITAMID WATER 511 | 4000 - 8000 | 130 - 170 | 200 | 5.8 | 100 - 110 |
|
|
|
| ITAMID WATER 512 | 8000 - 12000 | 200 - 240 | 135 | 5.40 | 70 - 75 |
|
|
|
Polyamides
| Product | Viscosity (cps@25°C) | Gardner colour | PHR (mixing ratio) | Pot-life 150g@20°C (min) | Labelling | Technical data sheet | Safety data sheet |
|---|---|---|---|---|---|---|---|
|
ITAMID B Anti corrosive systems: primers, glazes, zinc primers. Good surface hardness and chemical resistance |
3100 - 3800 (@ 75°C) | 8 | 100 - 50 | 160 - 200 |
|
|
|
|
ITAMID C Anti corrosive systems, plasters, structural adhesives, sealants, synthetic mortars. ITAMID C offers less rigid systems and better adhesion compared to ITAMID D |
500 - 900 (@ 75°C) | 8 | 65 - 35 | 90 - 100 |
|
|
|
| ITAMID C/F | 650 - 950 (@ 75°C) | 8 | 55 | 70 - 140 |
|
|
|
| ITAMID C/M | 50000 - 70000 | 8 | 55 | 90 - 110 |
|
|
|
|
ITAMID D Anti corrosive systems, plasters, structural adhesives, sealants, synthetic mortars. It can be used pure without diluition |
300 - 600 (@ 75°C) | 8 | 50 | 110 - 130 |
|
|
|
|
ITAMID F Low viscosity polyamid resin for the formulation of adhesives, protective coatings, anti-corrosion paints; high chemical resistance, flexibility and adhesion. |
2000 - 4000 | 8 | 50 | 90 - 160 |
|
|
|
|
ITAMID FL31 Low viscosity polyaminoamide resin with high reactivity and low sensitivity to carbamation. For the formulation of epoxy mortars, adhesives, pouring masses, paints, plasters and fooring. |
500 - 1000 | 8 | 50 - 60 | 110 - 130 |
|
|
|
|
ITAMID FL32 Low viscosity polyaminoamide resin with high reactivity and low sensitivity to carbamation. For the formulation of epoxy mortars, adhesives, pouring masses, paints, plasters and fooring. |
150 - 400 | 10 | 50 - 55 | 70 - 130 |
|
|
|
|
ITAMID FL33 Low viscosity polyaminoamide resin with high reactivity and low sensitivity to carbamation. For the formulation of epoxy mortars, adhesives, pouring masses, paints, plasters and fooring. |
400 - 700 | 10 | 50 | 90 - 120 |
|
|
|
|
ITAMID FL40 Epoxy mortars,concrete reparation,adhesives,pouring,paints,plasters,flooring. Imidazolynic polyamino-amide with good mechanical properties and resistance to carbonation. Low exothermy. |
100 - 500 | 8 | 50 | 210 - 260 |
|
|
|
|
ITAMID FL40/S Epoxy mortars, concrete reparation, adhesives, pouring, paints, plasters, flooring. Polyamino-amide with high imidazolynic content, good mechanical properties and resistance to carbamation. Low exothermy. |
200 - 600 | 8 | 50 | 270 - 330 |
|
|
|
|
ITAMID FL300 Epoxy mortars, concrete reparation, adhesives, pouring, paints, plasters, flooring. |
500 - 1000 | 8 | 50 - 60 | 70 - 90 |
|
|
|
| ITAMID FL400 | 200 - 600 | 10 | 50 | 370 - 430 |
|
|
|
| ITAMID FL450 | 500 - 1500 | 15 | 69 |
|
|
|
| Product | Viscosity (cps@25°C) | Gardner colour | PHR (mixing ratio) | Labelling | Technical data sheet | Safety data sheet |
|---|---|---|---|---|---|---|
| ITAMID A60BA | 1600 - 2200 | 8 | 166 |
|
|
|
| ITAMID A60XIB | 1500 - 4000 | 8 | 166 |
|
|
|
| ITAMID AB49XMBS | 120 - 170 | 8 | 100 |
|
|
|
| ITAMID B80XB | 3000 - 6000 | 8 | 65 |
|
|
|
|
ITAMID A60X High molecular weight polyamide in xylene for high salt spray resistance protective coatings. Great overall chemical and weathering resistance and surface gloss |
2000 - 3500 | 8 | 166 |
|
|
|
|
ITAMID A60XM Solvent based anti corrosive systems. Methoxypropanol version of A60X |
2200 - 3300 | 8 | 166 |
|
|
|
|
ITAMID B42PMSX Polyamide in solution of xylene, metoxipropanol and solvesso 100, for formulation of shop-primer for metal surfaces |
40 - 100 | 7 | 100 |
|
|
|
|
ITAMID B70X 70% polyamide in xylene. Industry standard for metal anticorrosion primers |
800 - 1500 | 8 | 75 |
|
|
|
| Product | Viscosity (cps@25°C) | Gardner colour | PHR (mixing ratio) | Pot-life 150g@20°C (min) | Labelling | Technical data sheet | Safety data sheet |
|---|---|---|---|---|---|---|---|
| ITAMID G | 4500 - 6500 | 7 | 70 | 130 - 170 |
|
|
|
| ITAMID FL41 | 200 - 500 | 8 | 37 | 150 - 170 |
|
|
|
| ITAMID FL41/S | 150 - 400 | 7 | 37 | 35 - 45 |
|
|
|
|
ITAMID FL41W3 Epoxy mortars, adhesives, paints, grouts for flooring. Good resistance to atmospheric agents and diluited inorganic acids, highly washable |
100 - 350 | 7 | 37 | 40 - 50 |
|
|
|
|
ITAMID FL328 Emulsifible poliamide adduct, ideal for the formulation of epoxy mortar and tile adhesive |
1500 - 3500 | 7 | 55 - 65 | 160 - 200 |
|
|
|
| ITAMID FL491 | 100 - 500 | 10 | 32 | 55 - 75 |
|
|
|
| ITAMID FL540 | 3000 - 6000 | 8 | 100 | 80 - 120 |
|
|
|
| Product | Viscosity (cps@25°C) | Gardner colour | PHR (mixing ratio) | Pot-life 150g@20°C (min) | Labelling | Technical data sheet | Safety data sheet |
|---|---|---|---|---|---|---|---|
| ITAMID FL521/S | 500 - 1500 | 8 | 60 | 30 - 60 |
|
|
|
| ITAMID FL561/S | 500 - 1500 | 8 | 60 | 40 - 60 |
|
|
|
|
ITAMID FL520 Ideal concrete primer / vapour barrier. Excellent adhesion, flexibility and reactivity also on wet substrates. It is also a very good intermediate coating or high solids primer on metal |
500 - 1500 | 8 | 60 | 80 - 120 |
|
|
|
|
ITAMID FL520/S Excellent flooring primer / vapour barrier and all round protective coatings also on metal. Faster curing version of FL520 |
500 - 1500 | 8 | 60 | 30 - 40 |
|
|
|
|
ITAMID FL550/S Excellent flooring primer / vapour barrier and all round protective coatings also on metal. Better flexibility compared to cycloaliphatic products; suitable for wet and fresh concrete |
200 - 500 | 8 | 50 | 30 - 50 |
|
|
|
|
ITAMID FL560 Phenol free polyamide, ideal for surface tolerant primers for flooring or protective coatings on metal |
800 - 1800 | 8 | 60 | 70 - 90 |
|
|
|
|
ITAMID FL560/S Phenol free polyaminoamide, ideal for surface tolerant primers for flooring or protective coatings on metal. Faster version of Itamid FL560 |
500 - 1500 | 8 | 60 | 45 - 55 |
|
|
|
| Product | Viscosity (cps@25°C) | Gardner colour | PHR (mixing ratio) | Labelling | Technical data sheet | Safety data sheet |
|---|---|---|---|---|---|---|
| ITACUR 75X | 3000 - 5500 | 8 | 60 - 85 |
|
|
|
|
ITACUR 60XB Solvent based systems,glazes, zinc primer. Polyamide adduct in xylol and isobuthanol solution. Compared to pure polyamide there is higher reactivity at cold temperature and wetting conditions. Good surface gloss |
900 - 1400 | 8 | 100 |
|
|
|
|
ITACUR 60XM Solvent based systems,glazes, zinc primer. Polyamide adduct in xylol and methoxypropanol solution. Compared to pure polyamide there is higher reactivity at cold temperature and wetting conditions. Good surface gloss |
2000 - 4000 | 8 | 100 |
|
|
|
|
ITACUR 70XB Solvent based systems,glazes, zinc primer. Polyamide adduct in xylol and isobuthanol solution. Compared to pure polyamide there is higher reactivity at cold temperature and wetting conditions. Good surface gloss |
4500 - 6500 | 8 | 80 |
|
|
|
|
ITACUR 70XB-ES Solvent based systems,glazes, zinc primer. Polyamide adduct in xylol and isobuthanol solution. Compared to pure polyamide there is higher reactivity at cold temperature and wetting conditions. Good surface gloss |
4500 - 6500 | 8 | 70 |
|
|
|
|
ITACUR 600 Solvent based systems,glazes, zinc primer. Polyamide adduct in xylol isobuthanol and methoxypropanol solution. Compared to pure polyamide there is higher reactivity at cold temperature and wetting conditions. Good surface gloss |
1200 - 2200 | 8 | 70 - 85 |
|
|
|
|
ITACUR 700 Solvent based systems,glazes, zinc primer. Polyamide adduct in xylol and isobuthanol solution. Compared to pure polyamide there is higher reactivity at cold temperature and wetting conditions. Good surface gloss |
600 - 2500 | 8 | 123 |
|
|
|
Cycloaliphatic and Aliphatic polyamines
| Product | Viscosity (cps@25°C) | Gardner colour | PHR (mixing ratio) | Pot-life 150g@20°C (min) | Labelling | Technical data sheet | Safety data sheet |
|---|---|---|---|---|---|---|---|
| ITAMINE CA30LB | 15 - 30 | 3 | 30 | 160 - 260 |
|
|
|
| ITAMINE CA30LA | 10 - 30 | 3 | 30 | 120 - 160 |
|
|
|
| ITAMINE CA10 | 10 - 30 | 2 | 27 - 30 | 50 - 100 |
|
|
|
| ITAMINE CA401 | 5 - 30 | 1 | 30 | 50 - 70 |
|
|
|
| ITAMINE CA300 | 120 - 250 | 1 | 30 | 10 - 50 |
|
|
|
| ITAMINE CA396 | 150 - 450 | 8 | 50 | 25 |
|
|
|
| ITAMINE CA15H | 1 - 50 | 3 | 50 | 60 - 90 |
|
|
|
| ITAMINE CA30BH | 5 - 30 | 3 | 30 | 35 - 45 |
|
|
|
| ITAMINE CA30BL | 5 - 50 | 3 | 30 | 40 - 50 |
|
|
|
| ITAMINE CA30BL/H | 5 - 50 | 3 | 30 | 40 - 50 |
|
|
|
| ITAMINE CA30/H | 15 - 30 | 3 | 30 | 80 - 100 |
|
|
|
| ITAMINE CA30LA/H | 10 - 30 | 3 | 30 | 120 - 160 |
|
|
|
| ITAMINE CA30LB/H | 15 - 30 | 3 | 30 | 160 - 260 |
|
|
|
|
ITAMINE CA30LC Slower curing version of ITAMINE CA30LA |
15 - 30 | 3 | 30 | 250 - 350 |
|
|
|
| ITAMINE CA30LC/H | 15 - 30 | 3 | 30 | 250 - 350 |
|
|
|
| ITAMINE CA30P/H | 5 - 50 | 3 | 30 | 50 - 70 |
|
|
|
|
ITAMINE CA30 Solvent free epoxy coatings, self levelling mortars, adhesives. Usable by flow or injection also with fillers. Excellent selt levelling properties, yellowing resistance, mechanical and chemical reistance. |
15 - 30 | 3 | 30 | 80 - 100 |
|
|
|
| ITAMINE CA30B | 5 - 30 | 3 | 30 | 30 - 40 |
|
|
|
| ITAMINE CA860 | 10 - 50 | 2 | 25 | 540 - 600 |
|
|
|
| Product | Viscosity (cps@25°C) | Gardner colour | PHR (mixing ratio) | Pot-life 150g@20°C (min) | Labelling | Technical data sheet | Safety data sheet |
|---|---|---|---|---|---|---|---|
| ITAMINE CA110 | 400 - 1000 | 5 | 40 | 15 - 25 |
|
|
|
| ITAMINE CA121 | 150 - 400 | 3 | 40 | 40 - 50 |
|
|
|
| ITAMINE CA155 | 300 - 400 | 3 | 50 | 20 - 25 |
|
|
|
| ITAMINE CA48 | 500 - 3000 | 4 | 30 | 30 - 50 |
|
|
|
| ITAMINE CA58 | 400 - 600 | 2 | 55 | 45 - 55 |
|
|
|
| ITAMINE CA1516 | 100 - 500 | 3 | 40 | 5 - 25 |
|
|
|
| ITAMINE CA166 | 100 - 300 | 2 | 50 | 20 - 50 |
|
|
|
| ITAMINE CA489 | 220 - 420 | 2 | 50 | 15 - 35 |
|
|
|
| ITAMINE CA489LV | 50 - 300 | 2 | 50 | 15 - 35 |
|
|
|
| ITAMINE CA73 | 20 - 200 | 2 | 37 | 20 - 60 |
|
|
|
| ITAMINE CA269 | 20 - 120 | 3 | 44 | 20 - 50 |
|
|
|
| ITAMINE CA395/S | 250 - 550 | 8 | 50 | 18 |
|
|
|
| ITAMINE CA492 | 360 - 560 | 3 | 50 | 24 |
|
|
|
| ITAMINE CA390 | 200 - 400 | 4 | 50 | 38 |
|
|
|
| ITAMINE CA104 | 50 - 300 | 3 | 50 | 45 - 55 |
|
|
|
| ITAMINE CA112 | 20 - 150 | 3 | 50 | 90 |
|
|
|
| ITAMINE CA115 | 20 - 150 | 3 | 50 | 30 - 40 |
|
|
|
|
ITAMINE CA30N Medium-high reactivity hardener, with adhesion promoters |
15 - 40 | 3 | 30 | 35 - 70 |
|
|
|
|
ITAMINE CA85 Slower curing version of ITAMINE CA 75_37 with a yellowing resistance comparable to ITAMINE CA30 |
10 - 50 | 3 | 37 | 50 - 70 |
|
|
|
| ITAMINE CA85/H | 10 - 50 | 3 | 37 | 50 - 70 |
|
|
|
|
ITAMINE CA50 Self levelling hardener for flooring and floor painting,resin application on marble and granite. High reacting in wetting conditions and cold temperatures, high mechanical and chemical properties. High gloss of the finish product. Good resistance to the yellowing |
50 - 120 | 2 | 50 | 50 - 70 |
|
|
|
|
ITAMINE CA51L Hardener for flooring and floor painting. Good mechanical and chemical properties. High gloss of the finish product. Good resistance to the yellowing, good self levelling properties. Slow version of the CA51 |
150 - 250 | 2 | 50 | 30 - 40 |
|
|
|
|
ITAMINE CA60 Solvent free epoxy coatings, epoxy mortars, industrial flooring, suitable for varnishes. Good chemical and mechanical resistance. Good levelling and yellowing resistance |
300 - 500 | 3 | 60 | 45 - 50 |
|
|
|
|
ITAMINE CA62 High gloss high UV resistance top coat hardener. Excellent air releasing and wetting properties. Very good resistance to carbamation |
10 - 100 | 2 | 45 | 50 - 60 |
|
|
|
|
ITAMINE CA83P Excellent as a primer in industrial flooring, also in damp conditions and cold temperatures |
100 - 200 | 4 | 50 | 30 - 40 |
|
|
|
|
ITAMINE CA119 Self levelling flooring and solventless coating; good wetting properties. Good reactivity in damp conditions and low temperatures |
100 - 300 | 3 | 50 | 35 - 45 |
|
|
|
| ITAMINE CA125 | 100 - 300 | 2 | 50 | 35 - 45 |
|
|
|
| ITAMINE CA125S | 50 - 400 | 3 | 50 | 30 - 60 |
|
|
|
| ITAMINE CA1125 | 150 - 250 | 2 | 50 | 120 - 160 |
|
|
|
|
ITAMINE CA165 Phenol free hardener for epoxy resin for self levelling floorings with excellent surface and high gloss. Good yellowing and water spotting resistance |
100 - 300 | 2 | 50 | 20 - 50 |
|
|
|
|
ITAMINE CA488 Phenol free hardener for epoxy resin, for self levelling civil and industrial floorings , with beautiful surface and high gloss |
220 - 420 | 2 | 50 | 15 - 35 |
|
|
|
| ITAMINE CA488LV | 50 - 300 | 2 | 50 | 15 - 35 |
|
|
|
| Product | Viscosity (cps@25°C) | Gardner colour | PHR (mixing ratio) | Pot-life 150g@20°C (min) | Labelling | Technical data sheet | Safety data sheet |
|---|---|---|---|---|---|---|---|
|
ITAMINE RT22/S Good penetration and wetting of glass and carbon fibers. Accelerated version of RT22 |
100 - 200 | 3 | 25 | 15 - 25 |
|
|
|
| Product | Viscosity (cps@25°C) | Gardner colour | PHR (mixing ratio) | Pot-life 150g@20°C (min) | Labelling | Technical data sheet | Safety data sheet |
|---|---|---|---|---|---|---|---|
| ITAMINE CA35/H | 10 - 100 | 3 | 35 | 195 - 235 |
|
|
|
| ITAMINE CA40L/H | 5 - 30 | 1 | 40 | 400 - 500 |
|
|
|
| ITAMINE CA40/H | 5 - 30 | 1 | 40 | 240 - 300 |
|
|
|
| ITAMINE CA30LD | 15 - 50 | 3 | 30 | 350 - 450 |
|
|
|
| ITAMINE CA612 | 5 - 25 | 2 | 30 | 1560 - 1800 |
|
|
|
|
ITAMINE CA64 Flexible systems, joints and elastic structural adhesives. Can be used in combination with any standard epoxy resin and will give an average elongation at break of 80-90%. Does not loose flexibility with time or at low temperatures (-10°C). |
600 - 1800 | 7 | 134 | 40 - 70 |
|
|
|
| ITAMINE CA870 | 50 - 150 | 2 | 38 | 1800 - 1980 |
|
|
|
| Product | Viscosity (cps@25°C) | AHEW (g/eq) | Gardner colour | PHR (mixing ratio) | Labelling | Technical data sheet | Safety data sheet |
|---|---|---|---|---|---|---|---|
| ITACUR 500 | 1000 - 2000 | 272 | 3 | 60 |
|
|
|
| ITACUR 50XB | 1200 - 1800 | 331 | 3 | 80 |
|
|
|
| ITACUR 50XM | 1000 - 3000 | 331 | 3 | 80 |
|
|
|
| Product | Viscosity (cps@25°C) | Gardner colour | PHR (mixing ratio) | Pot-life 150g@20°C (min) | Labelling | Technical data sheet | Safety data sheet |
|---|---|---|---|---|---|---|---|
|
ITAMINE M150 Concrete mortars, adhesives. Highly reactive also at low temperatures. Usable as accelerator of aminopolyamides. |
200 - 400 | 3 | 50 | 8 - 11 |
|
|
|
|
ITAMINE M150FF/V0 VOC free and nonylphenol free version of M150 |
200 - 500 | 6 | 50 | 8 - 11 |
|
|
|
|
ITAMINE M160 Concrete mortars, adhesives. Extremely reactive also at low temperatures. Usable as accelerator of aminopolyamides. |
500 - 800 | 3 | 50 | 4 - 11 |
|
|
|
The information given here is purely indicative. Please get in touch with a ddchem contact person using the form on the website for more detailed information based on your specific needs.